Carburetor Reference Sheet and Related Parts
|
|||
Brand: Rochester | Type:
R4-E4ME Quadrajet Qjet |
Number: 17066603 |
CU: 4-759 |
General Reference Picture of a
R4-E4ME
|
Actual Reference Picture |
||
Disc: 80 Cadillac | Notes: Notes | ||
Cyl: | Newcarb- | ||
Rebuild Kit: | KT-5493B | ||
Float: | FLT-100-44 | Acc Pump: | 256 |
Choke Pulloff Front: | PO-5080LC | Acc Pump Cup: | |
Choke Pulloff Rear: | PO-5216 | Needle & Seat: | N/S-31-542 |
Choke Thermostat: | PowerValve: | ||
Jets: | Jets | ||
Mixture Control Solinoid: | MCS-3 | Mettering Rods: | |
Throttle Position Sensor: | Linkage Rods: | ||
Fuel Fitting: FuelFilter: |
Mixture Screw: | ||
Air Cleaner Gasket: |
Rebuilt Carburetor Ref Numbers |
||
Bowl Gasket: | Rebuild Ref Number: | 4-759 | |
Middle Gasket: | |||
Base Gasket: | 20-2269A | Core: | <<Core>> Search eBay |
Check the Rochester Parts Page for more parts |
|||
This carburetor was made by Rochester , The Rochester Products Division of General Motors was located in Rochester New York and built carburetors for GM vehicles since 1949 . It is a R4-E4ME the E4ME is a Electric side mounted choke with a Mixture Control Solinoid Rochester Quadrajet 4 barrel carburetor, which means the choke is located on the passenger side connected to the carburetor and uses key on power source and has a Mixture Control Solinoid (normaly blue 1980 has black) .They started making them in 1980 and ran threw 1990. Most will have 1 inch 20 Fuel inlet . 1980 and up electronic quadrajets use a different metering rod . This carburetor has a part number of 17066603 and used on 80 Cadillac . Check here for specific Muscle car Info |
Referenced by ; Rochester 17066603 |
This Site Designed By
EagleHosting WebSite Design ©2006 Carbs Unlimited [terms
& policys]