Edelbrock carbsnicecarb.jpg (14437 bytes)

Edelbrock Carbs & Prices

Need a Part not listed check out Edlebrocks Web Site then call 253-833-4106 with part #
Carb Accessories Page - AFB Parts Page

Edelbrock 1403Edelbrock 1404
Edelbrocks  Carburetor Owners Manual (1.8 MB)
500cfm - 600cfm - 750cfm - 800cfm - Marine - Thunder Series
Part # Description Price
500 CFM
Edelbrock 1403
E-1403
PERFORMER SERIES CARBURETOR - 500 CFM
- Electric Choke -

Recommended for small cubic-inch Performer and dual-quad applications (such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford; dual-quad C-26, F-28 and Street Tunnel Ram applications). Calibrated for performance rather than mileage. Includes both timed and full vacuum ports for ignition advance. Electric choke can be added.
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1403

Edelbrock 1404
E-1404
PERFORMER SERIES CARBURETOR - 500 CFM
- MANUAL CHOKE -
Recommended for small cubic-inch Performer and dual-quad applications (such as 305 c.i.d and smaller Chevrolet; 302 c.i.d. and smaller Ford; dual-quad C-26, F-28 and Street Tunnel Ram applications). Calibrated for performance rather than mileage. Includes both timed and full vacuum ports for ignition advance. Electric choke can be added.
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1404
600 CFM

Edelbrock 1403
E-1400
PERFORMER SERIES CARBURETOR - 600 CFM
- STREET LEGAL, ELECTRIC CHOKE -

50-state street legal for all Chevrolet/GMC V8 engines, 1980 and earlier (E.O. #D-215-10). Lean calibration for maximum fuel economy. Includes EGR, timed vacuum ports and fuel vapor outlet. Comes with installation kit and instructions. Not for computer-controlled engines.
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1400


Edelbrock 1404
E-1405
PERFORMER SERIES CARBURETOR - 600 CFM
- MANUAL CHOKE -
Recommended for most Performer applications and small cubic-inch Torker II applications. Calibrated for performance rather than mileage. Includes both timed and full vacuum ports for ignition advance. Electric choke can be added if needed.
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1405



Edelbrock 1403
E-1406
PERFORMER SERIES CARBURETOR - 600 CFM
- ELECTRIC CHOKE - Non Emissions
Recommended for most Performer applications. Lean calibration for maximum fuel economy. Includes both timed and full vacuum ports for ignition advance. Comes with complete installation kit and Owner's Manual. Comes with the following metering jets, rods
and springs: Metering Jets: Primary .098, Secondary .095; Metering Rods: .075 x .047. Step-Up Spring: yellow (4" Hg).
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1406
750 CFM
1405a.jpg (21850 bytes)
E-1407
PERFORMER SERIES CARBURETOR- 750 CFM
- MANUAL CHOKE -
Recommended for most Performer RPM/Torker II applications and large cubic-inch Performer applications. Richer calibration for maximum performance. Includes both timed and full vacuum ports for ignition advance. Electric choke can be added if needed. Comes with complete installation kit and Owner's Manual. Comes with the following jets,
rods and springs: Metering Jets: Primary .113, Secondary .107; Metering Rods: .071 x .047. Step-Up Spring: orange (5" Hg).
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1407

1406a.jpg (8066 bytes)
E-1411
 
PERFORMER SERIES CARBURETORS - 750 CFM
 - ELECTRIC CHOKE -
For 402 c.i.d. and larger Performer applications. Lean calibration for maximum fuel economy. Provides excellent fuel economy when used on 454 c.i.d. Chevrolet and 460 c.i.d. Ford Performer applications. Includes both timed and full vacuum ports for ignition
advance. Comes with the following jets, rods and springs: Metering Jets: Primary .110, Secondary .107; Metering Rods: .075 x .047. Step-Up Spring: orange (5" Hg).
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1411
800 CFM
1405a.jpg (21850 bytes)
E-1412
PERFORMER SERIES CARBURETOR- 800 CFM 
- MANUAL CHOKE -
Recommended for most Performer RPM/Torker II applications and large cubic-inch Performer applications. Richer calibration for maximum performance. Includes both timed and full vacuum ports for ignition advance. Electric choke can be added if needed. Comes with complete installation kit and Owner's Manual.
Ford Linkage Adaptor #EDL1483
Chrysler Adaptor #EDL1481

Adaptor #TD2034 for spread Bore Manifold
E-1412
MARINE CARBS
1409a.jpg (8596 bytes)
E-1409
PERFORMER SERIES CARBURETORS - 600 CFM - ELECTRIC CHOKE, MARINE -
For use with Edelbrock Performer manifolds and others of similar design in marine applications. Complies with U.S. Coast Guard safety standards. Cast surfaces are iridited and shafts and pump arm are teflon coated for maximum corrosion protection. Other features include modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8-inch inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent,fits 5-1/8" flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance. Comes with the following jets, rods and springs: Metering Jets: Primary .098, Secondary .101; Metering Rods: .068 x .047. Step-Up Spring: orange (5" Hg).

Adaptor #TD2034 for spread Bore Manifold
E-1409

1409a.jpg (8596 bytes)
E-1410

PERFORMER SERIES CARBURETORS - 750 CFM - ELECTRIC CHOKE, MARINE -
For use with Edelbrock Performer RPM and Torker II manifolds and others of similar design in marine applications. Complies with U.S. Coast Guard safety standards. Cast surfaces are iridited; shafts and pump arm are teflon coated for maximum corrosion protection. Other features include: modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8-inch inverted flare fuel inlet fitting, tube in airhorn for fuel pump vent,fits 5-1/8" flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance. Comes with the following jets, rods and springs: Metering Jets: Primary .113, Secondary .107; Metering Rods: .071 x .047. Step-Up Spring: orange (5" Hg).

Adaptor #TD2034 for spread Bore Manifold
E-1410



EDL1207

Edelbrock triple chrome-plated round air
cleaners work with all popular 5-1/8" diameter carburetors (Performer Series, Holley, Thermoquad, Quadrajet and Carter AFB). The 10" and 14" models have knock-outs in the air cleaner base and include an adapter for crankcase ventilation.14" x 3"
EDL1207

Edelbrock all 1400 series
C-4 AFB Carter Rebuild Kit
Fits: 1400 1403 1404 1405 1406 1407 1411 1412 9502 9504 9205 9635 9636 9637 9755 9641 9758
KT-5281

 


Carb Accessories Page - AFB Parts Page

Need a Part not listed check out Edelbrocks Web Site then call 253-833-4106 with part #

Prices Subject to change without notice - No free shipping on Edelbrock Carbs

 

bar1.gif (2690 bytes)
E-Mail sales@carbs.net
bar1.gif (2690 bytes)

This Site Designed By
EagleServer WebSite Design

 

Live Chat